Aerpro APVCBB6 Bonnet Mount UHF Antenna Bracket | Ford Ranger PX 2012-2021 & Everest 2015-2022

Back Order - Expected to ship in 2-5 business days
Need it fast? Contact us to confirm lead times.
Pickup currently unavailable.

DETAILS

Overview

Your UHF antenna,
on the bonnet hinge.

A vehicle-specific UHF antenna bracket for the Ford Ranger PX, PX2 and PX3 2012-2021 and Ford Everest UA and UA II 2015-2022. It bolts to the passenger side bonnet hinge using the existing mounting points, so there’s no drilling and nothing to modify.

Made from a single piece of press-bent 4mm steel with a matte black powder-coated finish. The 18mm hole takes any standard UHF CB antenna, and the cable slot lets you fit or remove the antenna without cutting the cable.

Aerpro APVCBB6 Bonnet Mount UHF Antenna Bracket to suit Ford Ranger PX1 PX2 PX3 2012-2021 & Everest 2015-2022

4mmPress-bent steel

18mmAntenna hole

5mmCable slot

No drillExisting mounting points

Where it mounts

Made for the Ford Ranger PX1 PX2 PX3 2012-2021 & Everest 2015-2022

The bracket picks up the existing bolts on the passenger side bonnet hinge. It’s shaped so the bonnet still opens and closes normally and the wipers aren’t blocked.

Suits all Ranger variants, including Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS and XLT.

✓Bolts to the passenger side bonnet hinge
✓Uses the existing mounting points, no drilling
✓Bonnet opens and closes as normal
✓Clear of the window wipers

Compatibility

✓Ford Ranger PX, PX2 and PX3 2012-2021
✓Ford Everest UA and UA II 2015-2022

Not suitable for:

✕Ford Ranger RA (Next Gen) 2022-on: use APVCBB10

Tech specs

Suits	Ford Ranger PX, PX2 and PX3 2012-2021 Ford Everest UA and UA II 2015-2022
Mounting position	Passenger side bonnet hinge
Material	4mm press-bent steel
Finish	Matte black powder coat
Antenna mounting hole	18mm
Cable slot	5mm
Brand	Aerpro
Part number	APVCBB6

What’s included

✓1 x Aerpro APVCBB6 bonnet mount UHF antenna bracket

Antenna, antenna base and coax cable are not included. The bracket fits with your vehicle’s existing bolts.

Simple installation

1Fit the bracket

Undo the existing bolts at the passenger side bonnet hinge, sit the bracket in place and refit the bolts firmly.

2Mount the antenna

Fit your UHF antenna base through the 18mm hole and tighten it down.

3Run the cable

Slide the coax through the 5mm cable slot and route it into the cabin to your radio.

Goes well with

Uniden ATX970S Heavy Duty Antenna, 702mm

3.0 dBi heavy duty raydome, short enough for tracks and car parks.

Uniden ATX890S Heavy Duty Antenna, 612mm

3.0 dBi in a compact 612mm length.

Uniden XTRAK 80 Pro 4X4 Pack

Smart UHF CB radio with Bluetooth, packed with the ATX970S antenna.

Frequently asked questions

Will it fit my antenna?

Yes. The 18mm hole suits standard UHF CB antenna bases from any brand, including Uniden and GME.

Do I need to drill anything?

No. It uses the existing mounting points on the vehicle.

Will it stop the bonnet opening?

No. It’s designed so the bonnet and wipers work as normal.

Can it go on the driver side?

No. Each bracket is shaped for the passenger side hinge of the vehicles listed.

Is an antenna included?

No. This is the bracket only. Choose an antenna and coax to suit.

Not sure what you need?

Tell us your vehicle, model year and antenna and we will check the right bracket with you before you buy.

Contact our team

Features

✓Vehicle-specific fit for the Ford Ranger PX1 PX2 PX3 2012-2021 & Everest 2015-2022
✓Passenger side bonnet hinge, uses the existing mounting points
✓Single piece of press-bent 4mm steel