

12 Volt Direct – 12V to 30V DC Step-Up Converter for Starlink Mini
Power your Starlink Mini reliably from any 12V vehicle, caravan, or battery setup with the 12 Volt Direct DC-DC Step-Up Converter.
This compact and rugged converter has been custom pre-configured to output a stable 30V DC, ensuring your Starlink Mini gets the voltage it needs — even when voltage drop becomes an issue.
Starlink Mini requires a minimum of 12V to operate, but many 12V systems can dip below that under load. Long cable runs, battery sag, or standard vehicle wiring can all cause voltage drop, leading to instability or shutdowns.
Even a small drop below 12V — caused by poor connections, cold weather, or high draw — can prevent the dish from powering up correctly. This converter solves that problem by stepping up your 12V input to a consistent 30V output, providing clean and reliable power no matter the conditions.
Input Voltage: 9–15V DC (works with all standard 12V systems)
Output Voltage: Regulated 30V DC / 3A (90W max), pre-set for Starlink Mini
Efficiency: ≥92% at full load for maximum performance with minimal heat
Built-in Protections: Over-current, reverse polarity, short circuit, and thermal shutdown
Construction:
Die-cast aluminium housing for passive cooling
Sealed design for use in harsh environments
Compact 60mm x 60mm footprint
12V cigarette lighter plug with inline 10A fuse
Pre-wired output barrel socket compatible with Starlink Mini DC cables
Plug-and-play simplicity — no need for soldering or configuration.
Off-grid caravans & camper trailers
4WD touring setups
Marine and mobile internet systems
Anyone powering Starlink Mini from a 12V battery
Plug into any 12V accessory socket or hardwire via Anderson plug.
Mount the converter on a flat surface using screws or adhesive tape.
Connect your Starlink Mini using the original DC cable.
You're online — without the worry of voltage drop.
Keep your Starlink Mini connected — no matter the voltage on your 12V line.
Exclusively from 12 Volt Direct — Built for Australian conditions.
Input Voltage: 9–15V DC (works with all standard 12V systems)
Output Voltage: Regulated 30V DC / 3A (90W max), pre-set for Starlink Mini
Efficiency: ≥92% at full load for maximum performance with minimal heat
Built-in Protections: Over-current, reverse polarity, short circuit, and thermal shutdown
Make 4 payments of $17.49 over 8 weeks with
Make 4 payments of $15.99 over 8 weeks with
Make 4 payments of $39.70 over 8 weeks with
Make 4 payments of $14.99 over 8 weeks with
Make 4 payments of $12.49 over 8 weeks with
This item is currently on back order and may require additional processing time.
This is a non-stocked item and may require additional processing time. Please click here for more information.