BLUETTI Premium 200 V2 Portable Power Station | 2,700W 2,073
Make 4 payments of $499.75 over 8 weeks with

In Stock - Ready for immediate dispatch or pickup
Pickup Available from Punchbowl, NSW
BLUETTI Sora 500
The Sora 500 is BLUETTI’s big folding panel: 500W from 12 panel sections that fold down to 570 x 445 x 85 mm and weigh 12.9 kg. BLUETTI says it’s 40% smaller and 28% lighter than a conventional 500W panel.
N-type mono cells reach up to 25% conversion efficiency. The ETFE surface wipes clean, and it’s IP67 water resistant for dusty tracks and wet mornings.
It runs on a standard MC4 connector. At 49.1V open circuit, one Sora 500 suits power stations with a 12-60V solar input, like the Premium 200 V2, Elite 400 and each of the Apex 300’s two solar inputs.
Why buy BLUETTI from us
Get your panel and power station working together from day one, with advice from a local team.
✓A real shop in Sydney
We’re a bricks and mortar store, not a faceless online warehouse. You can visit us, or pick up your order from our Sydney shop.
✓Talk to a real person in Australia
Call or message our Sydney team (details on our contact page). You’ll speak to someone local who knows BLUETTI, not an overseas call centre.
✓Shipped Australia-wide
We send BLUETTI orders to every state and territory, from the city to the bush.
✓Matched to your power station
We’ll check the BLUETTI Sora 500 suits your power station’s solar input (voltage, watts and plugs) before you buy.
✓Local support after you buy
Questions about setting it up, charging or getting the most from your BLUETTI? Our team here in Australia is happy to help.
✓The whole setup in one place
We stock the BLUETTI power stations, panels, chargers, cables and mounting trays that work together, so you can get everything from one store.
Ask us a questionMake us your first stop for BLUETTI.
Next-gen cells
Compared with conventional PERC panels (about 23%), BLUETTI says the Sora 500’s N-type cells give more power from the same sun, lose less output over the years and hold up better on hot days and in low light.


Packs down small
Fold it up, buckle the strap and carry it by the handle like a case. It packs into the canopy, ute tray box or caravan boot without taking over the load space.
Power on your terms
Plug it into your power station with the MC4 lead and keep the fridge, lights and devices running off the sun. One panel suits units with a 12-60V solar input. BLUETTI shows an Apex 300 charging to full in about 4 hours from two Sora 500s, and an Elite 100 V2 in about 3.1 hours from one.
Charging times are BLUETTI’s figures in good conditions. Weather, angle, shade and temperature all affect real output.


Ones with an MC4-compatible solar input that accepts 49.1V open circuit. From our range that includes the Premium 100 V2, Premium 200 V2 and Elite 400 (12-60V) and the Apex 300 (two 12-60V inputs, one panel on each). It’s too high in voltage for 12-28V units like the AC2P and AC50P. Two in series (about 98V) only suit high-voltage inputs like the AC200P L.
No. The Sora 500 only has MC4 connectors. It’s made to charge a power station, not phones directly.
No. It’s IP67 water resistant, which covers splashes. Don’t leave it out in the rain or sitting in water for long.
BLUETTI doesn’t recommend it. For the best results, use panels of the same type and brand.
No. It’s a portable folding panel.
Yes, if it has MC4 connectors and its solar input voltage and current suit the panel. contact our team and we’ll check your unit.
Still got a question? Our Sydney team is happy to help. Get in touch and you’ll talk to a real person in Australia.
Make it a complete setup
Two solar inputs (1,200W, 12-60V each): run one Sora 500 on each, about 4 hours to full per BLUETTI.
One Sora 500 suits the Premium 200 V2’s 1,000W, 12-60V solar input.
One panel suits the Premium 100 V2’s 12-60V input: BLUETTI shows about 3.1 hours to full on the Elite 100 V2 (same input).
49.1V open circuit sits inside the Elite 400’s 12-60V, 1,000W solar input.
5 m MC4 extension to put the panel in full sun and keep the power station in the shade.
| Rated power | 500W |
| Panel type | N-type mono |
| Conversion efficiency | Up to 25% |
| Voltage at max power (Vmp) | 40.92V |
| Current at max power (Imp) | 12.22A |
| Open circuit voltage (Voc) | 49.1V |
| Short circuit current (Isc) | 13.31A |
| Connector | Standard MC4 |
| Water resistance | IP67 |
| Number of panels | 12 |
| Weight | 12.9 kg |
| Dimensions (unfolded) | 2,541 x 1,146.6 x 3 mm |
| Dimensions (folded) | 570 x 445 x 85 mm |
| Operating temperature | -25°C to 65°C |
| Best working temperature | 25°C |
| Warranty | 12 months |
BLUETTI doesn’t list any other box contents for the Sora 500. Panel-to-power-station cables depend on your unit. contact our team if you need the right lead.
| SKU | BE-SORA500 |
| Model # | BE-SORA500 |
| Barcode # | 6978341871020 |
| Brand | Bluetti |
| Weight | 12.9 kg |
| Connector | MC4 |
| Rated power | 500W |
| Open circuit voltage | 49.1V |
| Shipping Weight | 14.8000kg |
| Shipping Width | 0.650m |
| Shipping Height | 0.165m |
| Shipping Length | 0.550m |
| Shipping Cubic | 0.058987500m3 |
Make 4 payments of $499.75 over 8 weeks with

Make 4 payments of $749.75 over 8 weeks with

Make 4 payments of $262.25 over 8 weeks with

Make 4 payments of $749.75 over 8 weeks with

Make 4 payments of $217.25 over 8 weeks with

Make 4 payments of $132.25 over 8 weeks with

This item is currently on back order and may require additional processing time.
This is a non-stocked item and may require additional processing time. Please click here for more information.