In Stock - Ready for immediate dispatch or pickup
Order in for Dispatch Today
Pickup Available from Punchbowl, NSW

 
 

DETAILS

Overview

Your UHF antenna,
on the bonnet hinge.

A vehicle-specific UHF antenna bracket for the Holden Colorado RG 2017-2020 (facelift). It bolts to the passenger side bonnet hinge using the existing mounting points, so there’s no drilling and nothing to modify.

Made from a single piece of press-bent 4mm steel with a matte black powder-coated finish. The 18mm hole takes any standard UHF CB antenna, and the cable slot lets you fit or remove the antenna without cutting the cable.

Aerpro APVCBB11 Bonnet Mount UHF Antenna Bracket to suit Holden Colorado RG 2017-2020
4mmPress-Bent Steel
18mmAntenna Hole
5mmCable Slot
No drillExisting Mounting Points

Where it mounts

Made for the Holden Colorado RG 2017-2020

The bracket picks up the existing bolts on the passenger side bonnet hinge. It’s shaped so the bonnet still opens and closes normally and the wipers aren’t blocked.

  • ✓Bolts to the passenger side bonnet hinge
  • ✓Uses the existing mounting points, no drilling
  • ✓Bonnet opens and closes as normal
  • ✓Clear of the window wipers

Compatibility

  • ✓Holden Colorado RG 2017-2020 (facelift)

Not suitable for:

  • ✕Holden Colorado RG 2012-2016 (pre-facelift)

Tech specs

SuitsHolden Colorado RG 2017-2020 (facelift)
Mounting positionPassenger side bonnet hinge
Material4mm press-bent steel
FinishMatte black powder coat
Antenna mounting hole18mm
Cable slot5mm
BrandAerpro
Part numberAPVCBB11

What’s included

  • ✓1 x Aerpro APVCBB11 bonnet mount UHF antenna bracket

Antenna, antenna base and coax cable are not included. The bracket fits with your vehicle’s existing bolts.

Simple installation

1Fit the bracket

Undo the existing bolts at the passenger side bonnet hinge, sit the bracket in place and refit the bolts firmly.

2Mount the antenna

Fit your UHF antenna base through the 18mm hole and tighten it down.

3Run the cable

Slide the coax through the 5mm cable slot and route it into the cabin to your radio.

Goes well with

Uniden ATX970S Heavy Duty Antenna, 702mm
Uniden ATX970S Heavy Duty Antenna, 702mm

3.0 dBi heavy duty raydome, short enough for tracks and car parks.

Uniden ATX890S Heavy Duty Antenna, 612mm
Uniden ATX890S Heavy Duty Antenna, 612mm

3.0 dBi in a compact 612mm length.

Uniden XTRAK 80 Pro 4X4 Pack
Uniden XTRAK 80 Pro 4X4 Pack

Smart UHF CB radio with Bluetooth, packed with the ATX970S antenna.

Frequently asked questions

Will it fit my antenna?

Yes. The 18mm hole suits standard UHF CB antenna bases from any brand, including Uniden and GME.

Do I need to drill anything?

No. It uses the existing mounting points on the vehicle.

Will it stop the bonnet opening?

No. It’s designed so the bonnet and wipers work as normal.

Can it go on the driver side?

No. Each bracket is shaped for the passenger side hinge of the vehicles listed.

Is an antenna included?

No. This is the bracket only. Choose an antenna and coax to suit.

Not sure what you need?

Tell us your vehicle, model year and antenna and we will check the right bracket with you before you buy.

Contact our team

Features

  • ✓Vehicle-specific fit for the Holden Colorado RG 2017-2020
  • ✓Passenger side bonnet hinge, uses the existing mounting points
  • ✓Single piece of press-bent 4mm steel
  • ✓Matte black powder-coated finish
  • ✓18mm hole suits all standard UHF CB antennas
  • ✓Cable slot to fit or remove the antenna easily

Product Details

SKU APVCBB11
Barcode # 9317114570581
Brand Aerpro
Shipping Weight 0.2200kg

More From This Category