In Stock - Ready for immediate dispatch or pickup
Order in for Dispatch Today
Pickup Available from Punchbowl, NSW

 
 

DETAILS


Overview

Bolt down.
Strap in.

A made-to-measure steel tray for your Bluetti Elite 300. Bolt it into the ute, van or camper, strap the unit in, and it stays put on the roughest roads.

Made-to-measure fitSized to the Elite 300 footprint, 366 x 305 mm.
Bolts down solid6 mm mounting holes through the base.
Strap slots built inSlots at each end for a tie-down strap.
Bluetti Elite 300 battery tray

Made for the Elite 300

This 12 Volt Direct tray is cut and folded to suit the Bluetti Elite 300. The base sits flat under the unit and the folded sides stop it sliding around, so your power station rides in one spot instead of bouncing across the floor.

Mount it in the ute tub, canopy, drawer system, van or camper. It’s a simple, solid way to carry a power station without building a custom box around it.

Bluetti Elite 300 battery tray fitted

Straps shown for illustration. Not included.

Compatibility

  • ✓Bluetti Elite 300

Not suitable for:

  • ✕Bluetti AC180P / Premium 200 V2 – use TVD-BT01

Tech specs

SuitsBluetti Elite 300
Tray size366 x 305 mm x 40 mm high
MaterialPowder-coated steel, black
Mounting6 mm bolt holes in the base
Tie-downStrap slots at each end
Brand12 Volt Direct
Warranty12 months
Tray dimensions

What’s included

Bluetti Elite 300 battery tray

1 x 12 Volt Direct Elite 300 battery tray

Tie-down straps and mounting bolts are not included.

Simple installation

Three steps

No brackets to build and no special tools. A drill, a few bolts and a strap is all it takes.

1Pick your spot

Choose a flat, solid surface in the tub, canopy, drawer, van or camper. Check there’s room for cables and airflow.

2Bolt it down

Mark and drill through the 6 mm holes and fix the tray with bolts or screws to suit the surface.

3Strap it in

Sit the power station in the tray and run a tie-down strap through the end slots and over the top. Cinch it tight.

Always use a strap

The tray stops your power station sliding, but a tie-down strap through the end slots is what holds it down on rough roads. Straps aren’t included, so use a cam or ratchet strap rated for the weight.

Not sure? Contact our team

Product Details

SKU TVD-BT07
Barcode # 9359968003785
Brand 12 Volt Direct
Shipping Weight 2.3000kg
Shipping Width 0.330m
Shipping Height 0.070m
Shipping Length 0.390m

Others Also Bought

More From This Category