In Stock - Ready for immediate dispatch or pickup
Order in for Dispatch Today
Pickup Available from Punchbowl, NSW

 
 

DETAILS

Overview

Bolt down.
Strap in.

A made-to-measure steel tray for your Bluetti AC240P & AC200PL. Bolt it into the ute, van or camper, strap the unit in, and it stays put on the roughest roads.

Made-to-measure fitSized to the AC240P / AC200PL footprint, 430 x 305 mm.
Bolts down solid6 mm mounting holes through the base.
Strap slots built inSlots at each end for a tie-down strap.
Bluetti AC240P / AC200PL battery tray

Made for the AC240P & AC200PL

This 12 Volt Direct tray is cut and folded to suit the Bluetti AC240P, Bluetti AC240, Bluetti AC200PL, Bluetti AC200P and Bluetti AC200L. The base sits flat under the unit and the folded sides stop it sliding around, so your power station rides in one spot instead of bouncing across the floor.

Mount it in the ute tub, canopy, drawer system, van or camper. It’s a simple, solid way to carry a power station without building a custom box around it.

Bluetti AC240P / AC200PL battery tray fitted

Compatibility

  • ✓Bluetti AC240P
  • ✓Bluetti AC240
  • ✓Bluetti AC200PL
  • ✓Bluetti AC200P
  • ✓Bluetti AC200L

Not suitable for:

  • ✕Bluetti Apex 300 – use TVD-BT06
  • ✕Bluetti AC180T – use TVD-BT02

Tech specs

SuitsBluetti AC240P
Bluetti AC240
Bluetti AC200PL
Bluetti AC200P
Bluetti AC200L
Tray size430 x 305 mm
MaterialPowder-coated steel, black
Mounting6 mm bolt holes in the base
Tie-downStrap slots at each end
Brand12 Volt Direct
Warranty12 months
Tray dimensions

What’s included

Bluetti AC240P / AC200PL battery tray

1 x 12 Volt Direct AC240P / AC200PL battery tray

Tie-down straps and mounting bolts are not included.

Simple installation

Three steps

No brackets to build and no special tools. A drill, a few bolts and a strap is all it takes.

1Pick your spot

Choose a flat, solid surface in the tub, canopy, drawer, van or camper. Check there’s room for cables and airflow.

2Bolt it down

Mark and drill through the 6 mm holes and fix the tray with bolts or screws to suit the surface.

3Strap it in

Sit the power station in the tray and run a tie-down strap through the end slots and over the top. Cinch it tight.

Always use a strap

The tray stops your power station sliding, but a tie-down strap through the end slots is what holds it down on rough roads. Straps aren’t included, so use a cam or ratchet strap rated for the weight.

Not sure? Contact our team

Features

Battery Tray Mount To Suits Bluetti AC240 / AC240P / AC200P/ AC200PL Brand: 12 Volt Direct SKU: TVD-BT03

Product Details

SKU TVD-BT03
Model # TVD-BT03
Barcode # 9359968003891
Brand 12 Volt Direct
Type Tray Mount
SKU TVD-BT03
Shipping Weight 2.7000kg
Shipping Width 0.340m
Shipping Height 0.060m
Shipping Length 0.460m
Shipping Cubic 0.000150000m3

Others Also Bought

More From This Category