DETAILS

12 Volt Direct – 12V to 57V DC Step-Up Converter with Anderson Plug!

For Starlink Standard Kit V3

Keep your Starlink Standard Kit (V3) online and stable with this heavy-duty 12V to 57V DC step-up converter, purpose-built by 12 Volt Direct for caravans, 4WDs, off-grid battery systems, and mobile setups.

Equipped with a pre-wired Anderson plug input, this model connects directly to your auxiliary battery or 12V power system — no inverters, aftermarket routers, or complicated wiring required.

NOTE: This converter must not be connected to a cigarette lighter socket. The power draw of the Starlink system exceeds the maximum current rating of standard 12V sockets, which may result in overheating or damage.

Why It’s Needed

The Starlink Standard Kit (V3) is designed to run on a stable 57V power supply to operate both the dish and the standard modem. Standard 12V battery systems cannot provide this directly, and in real-world setups voltage drop is common — especially with long cable runs, high current draw, or partially discharged batteries.

This converter steps up your 12V input to a regulated 57V DC output, ensuring the Starlink V3 kit always receives the correct power for reliable operation, no matter how your 12V system fluctuates.

Key Features:

Input Voltage: 9–15V DC (works with all standard 12V battery setups)
Output Voltage: Regulated 57V DC / 3.5A max (≈200W) — factory set for Starlink V3
Connector Type: Anderson plug input for secure, high-current connection.
Output Lead: Starlink-compatible plug (ready to connect to standard modem)
Efficiency: ≥92% at full load = less wasted energy and heat
Protections: Reverse polarity, over-current, short circuit & thermal shutoff
Enclosure: Die-cast aluminium housing with built-in heat sink and fully potted internals for maximum durability in harsh environments

Ideal For

Off-grid caravan and camping systems
4WD and touring setups
Portable battery boxes with Anderson plug outputs
Remote installations where reliability is critical

Quick Setup

Plug the Anderson connector into your 12V battery or power box.
Connect your Starlink Standard Kit (V3) modem and dish using the supplied plug.
Done — reliable, regulated power with zero voltage drop issues.

Disclaimer: Starlink is a trademark of Space Exploration Technologies Corp. (SpaceX). This product is an aftermarket accessory designed by 12 Volt Direct and is not a genuine Starlink or SpaceX product.

Key Features:

Input Voltage: 9–15V DC (works with all standard 12V battery setups)
Output Voltage: Regulated 57V DC / 3.5A max (≈200W) — factory set for Starlink V3
Connector Type: Anderson plug input for secure, high-current connection.
Output Lead: Starlink-compatible plug (ready to connect to standard modem)
Efficiency: ≥92% at full load = less wasted energy and heat
Protections: Reverse polarity, over-current, short circuit & thermal shutoff
Enclosure: Die-cast aluminium housing with built-in heat sink and fully potted internals for maximum durability in harsh environments