In Stock - Ready for immediate dispatch or pickup
Pickup Available from Punchbowl, NSW
Starlink Gen 3 Dish Magnetic Flat Mounting Bracket Kit
Buy Now, Pay Later.
DETAILS
Overview
Your Gen 3 dish, flat on the roof
This steel bracket holds your Starlink Gen 3 Standard dish flat, and its magnetic feet stick it to a steel roof in seconds. No drilling, no tools, and it lifts off just as fast.
Made for camp. Set it up when you stop, pack it away before you drive.
27kg+Holding Force
SteelHigh-Strength Bracket
No drillTool-Free Fitting
Gen 3Standard Dish
Strong hold
Magnets do the work
Rubber-faced magnets on the bracket grip a steel roof with over 27kg of holding force, so the dish stays put through wind and weather at camp.
- ✓Clean the roof and magnets first
- ✓Place it on a flat steel surface
- ✓Lift it straight off when you leave
Need to know
Not for use while driving
This kit is built for parked setups. Take the dish down and stow it before you drive.
Magnets need a flat steel surface. For roof racks, see our Gen 3 roof rack clamp mount or aluminium Gen 3 roof rack mount.
Running the Gen 3 from 12V? Our 12V to 57V booster plugs into your Anderson outlet.
Complete your setup
Goes well with
12 Volt Adapter for Starlink Standard Kit V3 Step Up 57V Voltage Booster Power Supply with Anderson Plug
Anderson-in 57V supply for the Gen 3 Standard Kit.
$119.95 · View
Roof Rack Clamp Mount for Starlink Gen 3 Standard
Low-profile alloy clamp mount for Gen 3 dishes on flat rack bars.
$114.95 · View
Travel Bag for Starlink Gen 3 Starlink Gen 3 Travel Bag – Protective Carry Case for Dish, Router & Accessories
Padded, water-resistant bag for the Starlink Gen 3 kit.
$99.95 · View
12 Volt Power Adapter for Starlink Gen3 Dish
Wire-in 12V power for the Gen 3 Standard dish.
$100.00 · View
Not sure what your setup needs? Contact our team and we will check it with you.
Frequently asked questions
Can I drive with the dish on it?
No. It is not recommended for use while driving. Fit it when you stop and remove it before you move.
Will it work on my roof?
It needs a flat steel surface. It will not stick to aluminium or fibreglass.
Which dish does it suit?
The Starlink Gen 3 Standard dish. For the Starlink Mini, see our Mini magnetic mount.
Will it mark my paint?
The magnets have rubber faces. Wipe the roof and the magnets clean before fitting.
Is the dish included?
No, the mount is sold on its own.
What's the warranty?
12 months against manufacturing faults. Contact our team if you have any trouble.
Features
- ✓Strong magnetic feet with over 27kg of holding force
- ✓Holds the Gen 3 dish flat for a clear view of the sky
- ✓High-strength steel bracket
- ✓Rubber-faced magnets
- ✓Tool free, no drilling, no permanent changes
- ✓Easy on and off at each camp
Specifications
Mount
| Suits | Starlink Gen 3 Standard dish |
| Mount type | Magnetic, flat |
| Holding force | Over 27kg |
| Material | High-strength steel |
| Surface | Flat steel (not aluminium or fibreglass) |
| Use | Stationary only, not while driving |
| Warranty | 12 months |
What's Included
- 1 x Magnetic flat mounting bracket kit for Starlink Gen 3 Standard dish (dish not included)
Product Details
| SKU | TVD-SL08 |
| Model # | TVD-SL08 |
| Barcode # | 9359968002900 |
| Brand | 12 Volt Direct |
| Type | Mount Kit |
| SKU | TVD-SL08 |
| Shipping Weight | 5.1700kg |
| Shipping Width | 0.410m |
| Shipping Height | 0.080m |
| Shipping Length | 0.630m |
| Shipping Cubic | 0.000150000m3 |
In Store Pickup - FREE
More From This Category
Starlink Gen 3 12V Power Supply Converter (USB-C + 48V Outpu
Make 4 payments of $37.50 over 8 weeks with
