DETAILS
Overview
Chock it, level it, power it
Four Supex essentials for the moment you pull onto a site. Chock the wheels, settle the jockey wheel on a solid block, roll out the awning without the flapping, and plug your 15A lead into a normal 10A power point with RCD protection.
Everything here is the gear you reach for every trip, in one buy that lives in the van. It suits caravans, camper trailers and pop-tops.

Power
Your 15A lead, a 10A outlet
Not every site, shed or driveway has a 15A outlet. The Supex adaptor lets you plug your 15A caravan lead into a standard 10A power point, with a built-in 30mA Type A RCD and circuit breaker between the wall and your van.
- ✓30mA Type A RCBO with overload and residual current protection
- ✓Test and reset buttons, plus a power status light
- ✓IP55 with the lid closed, takes 15A leads up to 11mm
- ✓1.5m lead, high-vis case with hanging hook
A 10A outlet gives you up to 2400W in total. Running the air conditioner, kettle and microwave at once can trip it, so plan your power use.

Levelling

A solid base for the jockey wheel
The jockey wheel block gives you 150mm of lift, so there is less winding to get the van level. It is rated to 6 tonnes static load, holds the wheel or stand against side-to-side movement, and stacks for extra height on uneven ground.
- ✓6 tonne static load rating
- ✓Fits most standard jacks, jockey wheels and corner stands
- ✓Heavy-duty polypropylene, easy to clean
- ✓285 x 226 x 160mm, 1.8kg
Safety
Stop the van rolling
Chock a wheel before you unhitch. The Supex wheel chock is made in Australia for heavy-duty use, with rubber grips along the base. It helps stop your caravan or camper trailer rolling away and reduces the chance of the wheel digging into soft ground.
- ✓Rubber grips on the base
- ✓Bright yellow, easy to spot
- ✓210 x 120 x 110mm
- ✓Made in Australia

Awning

No more flapping awning
A loose awning flaps in the wind, keeps you up at night and can be damaged. The tensioner clamps onto your roll-out awning fabric and straps to the arm to hold it taut, with no tools needed.
- ✓Soft-padded, double-width clamp that does not mark or stretch the fabric
- ✓Velcro straps for a secure hold
- ✓UV stabilised, chemical-resistant nylon
- ✓Extra strap included for pop-top caravans
Not sure what your setup needs? Contact our team and we will check it with you.
Frequently asked questions
What's included in the kit?
One Supex 15A to 10A Caravan Power Adaptor, one Large Caravan Awning Tensioner (with a standard strap and an extra strap for pop-tops), one Caravan Jockey Wheel Block and one Wheel Chock.
Can I run my whole caravan from a 10A outlet?
You can connect it, but a 10A outlet gives you a maximum of 10A or 2400W across everything in the van. High-draw appliances such as air conditioners, kettles, heaters and microwaves can trip the adaptor if they run together.
Is the power adaptor safe to use outdoors?
It is rated IP55 against dust and water when the lid is closed, and has a built-in 30mA Type A RCD. It is made for temporary connection to a standard 10A outlet. It is not suitable for sale or use in New Zealand.
Will the jockey wheel block fit my van?
It is designed to fit most standard jacks, jockey wheels and corner stands, and is rated to 6 tonnes static load.
Can I stack the jockey wheel blocks?
Yes. The block is designed to stack for extra height on uneven ground. The kit includes one block.
Will the awning tensioner suit my awning?
It is made for roll-out awning fabric and suits most caravan and pop-top awning systems. An extra strap is included for pop-tops.
How many wheel chocks are included?
One. For extra security, chock the wheels on both sides of the van.
Product Details
| SKU | SUPEX-KIT-CARAVAN |
More info