200Ah LiFePO4 Pro Series Lithium Battery with Bluetooth & Ac
Make 4 payments of $274.75 over 8 weeks with

Back Order - Expected to ship in 2-5 business days
Need it fast? Contact us to confirm lead times.
Pickup currently unavailable.
Charging and 240V,
on one pre-wired board.
Everything in the Rover 40 plus a 2000W Pro Series pure sine wave inverter with RCD and automatic mains transfer. Choose the Rover 2000, or the Rover 2000 Pro with our 8 way digital Bluetooth switch panel, from the drop-down above.
Every Rover board is assembled in Australia by qualified auto electricians, using our Pro Series components, and backed by a 5 year warranty and lifetime technical support.

Rover 2000 shown. The Pro board is taller, with the switching module on the board.

Rover 2000 fitted in a ute canopy.
Bolt it in and connect
Everything is mounted, wired and labelled on a heavy-duty board, so you only connect the battery, vehicle, solar and your loads. A 100A (150A on the Pro) heavy duty circuit breaker protects the main feed and the midi fuse block protects each circuit.
40A Pro Series AC charger
Plug into 240V at home or a powered site and the multi-stage charger tops up your battery automatically. It has a dedicated lithium profile and a BMS wake-up button for lithium batteries that have gone to sleep.


40A DC-DC with MPPT solar input
Charges your auxiliary battery while you drive, from standard or smart alternators, and from solar when you’re parked. Up to 500W of charging at 94% efficiency.
500A Bluetooth battery monitor
See voltage, current, state of charge and time remaining on the display or in the 12 Volt Direct app, so you always know how much power you have left.


2000W Pro Series pure sine wave inverter
Clean 240V for laptops, induction cooktops, coffee machines and power tools. Plug in at a powered site and the automatic mains transfer switches your 240V loads over to shore power.
8 way Bluetooth switch panel
Choose the Rover 2000 Pro to add digital switching. Switch your lights, fridge, water pump and other 12V gear from one touch panel or from your phone, without a row of separate switches. The control module is pre-wired on the board, and the touch panel mounts in the cabin or wherever suits you.

Not suitable for:
| Model | Rover 2000 |
| System Voltage | 12V DC |
| AC Charger | 40A Pro Series, 200–260V AC input (TVD-AC40) |
| DC-DC Charger | 40A Pro Series, 500W, MPPT solar input (TVD-DC40-PRO) |
| Battery Monitor | 500A shunt, Bluetooth, display (TVD-BM500BT) |
| Inverter | 2000W pure sine wave, 4000W surge, RCD and mains transfer (TVD-IP2000-PRO) |
| Switching | Pro only: 8 way digital Bluetooth switch panel (TVD-DSP-8BT) |
| Protection | 100A (150A on the Pro) heavy duty circuit breaker, midi fuse block |
| Fused Circuits | 6 |
| Board Size | 470 x 590 mm (Pro: 455 x 680 mm) |
| Battery Types | LiFePO4, AGM, Gel, lead acid |
| Assembled In | Australia |
| Brand | 12 Volt Direct |
| Warranty | 5 years, plus lifetime technical support |

1 x Rover 2000 pre-wired board with:
Not included: battery, solar panel, battery and vehicle cables, the mega fuse and 50A inline fuse.
1Mount the board
Bolt the board to a wall or panel in your canopy, caravan or camper, close to the battery, with room around the chargers and inverter for airflow.
2Connect the vehicle and solar
Run the vehicle input from the start battery with a 50A midi fuse (8 B&S minimum, 6 B&S recommended for a 6 m run). Add the ignition sense wire for smart alternators, and plug in your solar panel or blanket.
3Connect the battery
Wire the board to your 12V battery. All negatives go through the shunt, never straight to the battery. Use 70 mm² cable and a 250A mega fuse for 2000W, or 95 mm² and 300A for 3000W (1.5 m run).
The board is pre-wired, so there are only a few connections to make. Cables, the battery and vehicle fuses, batteries and solar panels aren’t included. Have a qualified auto electrician do the vehicle and battery connections, and follow your local wiring rules.

Rover 2000 and Rover 3000 wiring diagram. For reference only; follow your local wiring rules.
Both boards have the same inverter, chargers and battery monitor. Choose yours from the drop-down above.
| Rover 2000 | Rover 2000 Pro | |
|---|---|---|
| AC charger | 40A | 40A |
| Battery monitor display | On the board | Supplied loose |
| Heavy duty circuit breaker | 100A | 150A |
| Pure sine wave inverter | 2000W | 2000W |
| 8 way Bluetooth switch panel | – | ✓ |
| Board size | 470 x 590 mm | 455 x 680 mm |
No 240V needed? See the Rover 20 & 40. Need more power? See the Rover 3000.
The board comes pre-wired and labelled, so a handy DIYer can mount it. We recommend a qualified auto electrician for the battery and vehicle connections and the 240V side.
Yes. The 40A DC-DC charger has an ignition sense wire input for vehicles with smart (variable voltage) alternators.
Any 12V lithium (LiFePO4), AGM, Gel or lead acid battery. For the inverter, use a lithium battery whose BMS can supply at least 200A continuous for 2000W, or 250A for 3000W.
Yes. The DC-DC charger has a solar input (12–28V) with MPPT, so a 12V panel or blanket plugs straight in.
We usually keep Rover boards in stock. If yours needs to be built, allow 4–6 weeks. Contact us to check before you order.
Tell us about your vehicle, battery and what you want to run, and we’ll help you pick the right Rover board.
Contact our team| SKU | TVD-PB-ROVER-2000-PARENT |
| Brand | 12 Volt Direct |
12 Volt Direct is a 12 V power specialist for the automotive, 4WD, caravan and off-grid industry. When 12V matters, trust the professionals. 12 Volt Direct was built around a simple idea: 12 V systems should be done properly. Its range is designed for the way Australians power their vehicles, carava...
Find Out More Make 4 payments of $274.75 over 8 weeks with

Make 4 payments of $424.75 over 8 weeks with

Make 4 payments of $44.99 over 8 weeks with

Make 4 payments of $17.25 over 8 weeks with

Make 4 payments of $199.75 over 8 weeks with

Make 4 payments of $487.25 over 8 weeks with

Make 4 payments of $199.75 over 8 weeks with

This item is currently on back order and may require additional processing time.
This is a non-stocked item and may require additional processing time. Please click here for more information.